|
| |
American Video Equipment.
"SNOOPER SYSTEM"
|
 | Video Out from the camera goes to video in on the VSI +. |
| This Camera typically watches the general area,including the
register,counter,employee and customer. |
| Most Uniwell Cash Terminals dont require the installation of an RS232 board,
which converts the printer data to RS232 for the VSI+ |
| Video out from the VSI+ goes onto the existing video system. |
| Video out to the monitor. |
| The EX option gives you two hard alarm outputs , to trigger alarming VCR's,
quads, or other alarming devices for exception reporting, allowing easy review of
exceptional sales. |
| The idea is whatever goes over the counter or bar "should be" on the
camera/video screen ? if not then a "mistake" or "theft" has occurred. |
|
|
Detection of Theft
| This Covert System allows the user to record such events as
"sweethearting", "No Sales", "Voids", "Returns &
Refunds", "Shortchanging" and "Substitute Scanning".
|
| "Sweethearting" - This requires an accomplice or sweetheart
who loads up expensive items for purchase. The operator then rings up the items
but charges a lower price than marked or does not even ring them in. This type of loss
shows up later as stock shrinkage.
|
| "No Sales" - are the most common exception. Some
legitimate users are making change or correcting change mistakes. The No Sale should
always be treated as an exceptional transaction. Towards the end of the shift whether the
clerk was performing short rings,pilfering,or substitute products, they will have to
remove the accumulated money before their shift ends. Therefore, it is especially
important to check for all no sale transactions within the last hour of a shift.
|
| "Voids" - are used after the customer has left the
bar/counter and the same transaction has been voided. The money is still in the register
and will have to be removed either then or towards the end of the shift.
|
|
|
VSI+ Features
| Easy menu driven setup & programming. |
| Auto Baud Rate detection eliminates internal dip switch settings. |
| 24 field programmable exceptions, "No Sales" |
| Numeric Ranges tied to exceptions for greater than, less than, inside a range of
numbers or outside of a range. |
| On Screen flagging of exceptions. |
| Programmable Alarm and flag durations. |
| Serial printer output of data or exceptions. |
| Programmable delay screen blanking. |
| Your choice of 1-9 lines displayed on screen. |
| On screen titler upto twenty characters. |
| Grey scale and Border selection from front panel. |
| Ten Character sizes. |
| Built in test mode. |
| Built in cash register demo. |
|
|
EX Option Alarm Outputs
The EX Option gives hard alarm outputs. This alarm can trigger a VCR or Switcher
to home a camera watching a particular Cash Terminal Quad or speed dome to go to a
particular position when certain types of exceptional transactions are detected. This is
an optional daughter board and must be ordered when purchasing the VSI unit. The alarm
outputs are accessed through the DB9 connector, which plugs into the rear of the VSI.
|
|
MV4 QUAD FEATURES
| 4 Camera Inputs - 50 images/second x number of inputs. |
| Duplex. |
| Easy to setup with no complicated menus. |
| Selection and playback of one or more cameras as a continuous scene in full or
quad screen display. |
| Full field multiplexed pull up on playback or quad format. |
| Time & Date recorded to tape from VCR. |
| High Resolution display at 832x288 or 768x288. |
| 16 Million Colours or 256 shades of grey. |
| No special cameras or synchronisation required. |
|
|
|
FREE DEMONSTRATION VIDEO TAPE AVAILABLE - PLEASE
E-MAIL TO RECEIVE YOUR FREE TAPE
sales@cpos-systems.co.uk
      
|